Ceracolors wax paint (part II)

image

As promised, I am continuing my review of Ceracolors wax paint. Above is the completed test painting done on an untreated cradled wood panel. In my review part I, I tested the paint on some acid-free mat board. I really liked the way it handled and had no problems adjusting to its characteristics.

Today, my review continues with how the paint handles on the untreated wood panel. I applied Ceracolors in Titanium White straight onto the small scrap panel with a palette knife as a background. It kinda looks like vanilla frosting and it spreads easily like it, too. 😋

image

Afterwards, I applied heat with a heat gun while the paint was still wet and noticed some bubbling.

When working with hot wax (encaustic) on untreated wood, there is always some off-gassing. This is because wood is always in various states of fluctuation, adjusting to the moisture level in the atmosphere. This fluctuation causes little pits to form in the molten wax and is inconsequential with regard to the structural integrity of the encaustic art work.

In the case of Ceracolors, I am working with a water miscible wax paint. As the paint dries and moisture evaporates, the paint forms cracks and flakes off slightly. This is bad news regardless of how cool the cracked texture looks in some parts. I’m hoping this problem will be resolved with the application of encaustic gesso (keeping fingers crossed and I will do another review that includes the results). The application of gesso on a substrate is standard practice in oil and acrylic painting.

image

Now onto the good part. As you can see with the little abstract test piece, you can get some really neat effects. You can apply the paint thickly straight out of the tube for impasto. You can water it down and get light watercolour effects. And you can use sgrafitto technicque and scratch into the paint without waiting a long time for paint to dry. The sgrafitto technique produces white lines or pointillist effects in my piece. The little white dots and lines were made by just scratching in with a sharp metal wire. I love the fact that you can do this, and in some of my watercolour paintings I have used white acrylic paint to get the same effect.

image

Below is another detail in close-up:

image

I am very excited and look forward to discovering many more things that you can do with this versatile paint. I’ll keep you posted.

Please follow and like me:

Leave a Reply